Next: software mixers
Up: device configuration
Previous: Diskwriter
OPENCP is able to store the sample data directly to mpeg compressed audio
streams. At the moment only MP1 and MP2 is support, but this might change in the
near future.
[devpMPx]
link=devpmpx
diskManual=off
layer=2
mode=1
freq=44100
rate=112000
model=2
crc=off
extension=off
copyright=off
original=off
emphasis=0
- diskManual
- start MPx writing with <ALT>+<s>. Note that this
options interferes with the same option in the devpDisk section.
- layer
- save the audio in either layer 1 or layer 2 format.
- mode
- set the audio output format:
0 |
stereo |
1 |
joint stereo |
2 |
dual channel |
3 |
mono |
- freq
- the mixing frequency used to calculate the input sample stream.
Valid option are 32000, 44100 and 48000.
- rate
- set the mpeg audio bitrate/s.
- model
- set the psychoacustic model. This is used for the internal
encoding of the audio data. Valid options are either 1 or 2.
- crc
- save crc checksums into the audio stream. As this enlarges the file
this option should be disabled.
- extension
- set the extension flag
- copyright
- set the copyright flag
- original
- set the original flag
- emphasis
- set the emphasis flag
documentation by doj - homepage www.cubic.org